Note: all orders totalling over $25 include shipping Canada wide.

Le Rez Expression Epoxy Pastes are made from pure color and are highly concentrated. For  epoxy pastes, very little is needed. Non opaque & transparent pastes, may require more to achieve desired colour.  A  little dab goes a long way (just a dip of the clean stir stick in to the paste, & that’s often enough). Typically a ratio of 2-10% colourants is suggested. Start with less, you can add more as needed, but do not exceed 10% ratio or if too much colourants is added, it can effect the cure of a resin & cause pre-mature exotherm. 
**Be sure to mix each paste before use and always use in a well-ventilated area.  
***IMPORTANT: Occasionally, the Le’Rez metallic pastes will solidify. This is due to climate change going from one climate to the other. Also it is due to high volume of pigments. They can easily be remedied by heating with a low heat setting on a heat gun. Heat 10 seconds, stir, then heat additional 10 seconds, & repeat until no longer solidified. Be careful not to get to close to your jar, or you will warp your jars. You can also warm them in a warm bath (set in ziplock baggie). There is a you tube video available about this. Enquire if you’d like the link & I will forward it. 
**Avoid  eye  and  skin  contact. Wear  appropriate  PPE  dependant  on individual  application  and  sensitivity.

Black Cherry Epoxy paste T 35g Le’Rez

SKU: 00196